The core meter point administration number, a 13-digit reference used in MPAS to identify the relevant Metering Point.

The core meter point administration number, a 13-digit reference used in MPAS to identify the relevant Metering Point.

The core meter point administration number, a 13-digit reference used in MPAS to identify the relevant Metering Point.

Name of customer site/project name.

Name of customer site/project name.

Address line 2 of the Customer Site.

Town / City of the Customer Site.

County of the Customer Site.

Postcode of the Customer Site.

Country of the Customer Site.

Six digit British National Grid X coordinate of the Customer Site.

Six or seven digit British National Grid Y coordinate of the Customer Site.

The point of connection between the transmission system and the distribution system that is linked with the Customer Site.

The supply point on the distribution system (representing an EHV/EHV transformation level) that is linked with the Customer Site.

The primary substation on the distribution system that is linked with the Customer Site.

The voltage at the Point of Connection to the distribution system.

Licence area Customer Site is connected within

The energy source type used in the production of electricity

The technology type that export electricity onto a distribution system

Indicates whether the generation in the Customer Site forms part of a CHP scheme.

This is the energy capacity of the storage facility (MWh).

Divide the storage capacity (MWh) by the Registered Capacity (MW) and round it down to the nearest 0.5 (half-hour)

This is the Registered Capacity of the "Energy Source 1" expressed in MW.

Where there is more than one plant type at a site, the "Energy Source 2" and "Energy Source 3" fields would be used to show the energy source types additional to the "Energy Source 1".

Where there is more than one plant type at a site, the "Energy Source 2" and "Energy Source 3" fields would be used to show the energy source types additional to the "Energy Source 1".

Indicates whether the generation in the Customer Site forms part of a CHP scheme.

This is the energy capacity of the storage facility (MWh).

Divide the storage capacity (MWh) by the Registered Capacity (MW) and round it down to the nearest 0.5 (half-hour).

Divide the storage capacity (MWh) by the Registered Capacity (MW) and round it down to the nearest 0.5 (half-hour).

Where there is more than one plant type at a site, the "Energy Source 2" and "Energy Source 3" fields would be used to show the energy source types additional to the "Energy Source 1".

Defined for “Energy Conversion Technology 1”.

Indicates whether the generation in the Customer Site forms part of a CHP scheme.

This is the energy capacity of the storage facility (MWh).

This is the energy capacity of the storage facility (MWh).

This is the Registered Capacity of the "Energy Source 3" expressed in MW.

Indicates whether the connection is subject to a flexible connection arrangement e.g. Active Network Management (ANM) during system normal conditions.

Connected" or "Accepted to Connect"?

This is the total Registered Capacity of generation already connected at the site expressed in MW.

This is the total MW export capacity permitted as per the connection agreement.

This is the total MVA export capacity permitted as per the connection agreement.

This is the total MW import capacity permitted as per the connection agreement.

This is the total MVA export capacity permitted as per the connection agreement.

Date the connection was provided in the case of a new connection. In cases where there was an existing connection, this is date the new equipment was connected

This is the Registered Capacity of generation that is not already connected, but has been Accepted to Connect, expressed in MW.

This is the new/additional MW export capacity (i.e. not yet connected) that has been accepted to connect as per the connection agreement.

This is the new/additional MW export capacity (i.e. not yet connected) that has been accepted to connect as per the connection agreement.

This is the new/additional MW import capacity (i.e. not yet connected) that has been accepted to connect as per the connection agreement.

This is the new/additional MVA import capacity (i.e. not yet connected) that has been accepted to connect as per the connection agreement.

Date the Customer accepted the connection offer from the DNO or IDNO.

Estimated date of energisation. This date is likely to change to reflect the latest date notified by customers.

Indicates whether a service is provided to the DNO.

Indicates whether a service is provided to the ESO or a TO.

Unique reference to the service(s) being provided.

Indicates whether the connection to the Customer Site is in a connection queue.

Unique reference to relevant distribution reinforcement required for connection.

Unique reference to relevant transmission reinforcement required for connection.

Date on which entry was last updated.